Fluke 789/T3000FC Process Meter with Temperature Kit and Fluke Connect™

Description

(item no. 4489241)

Product overview

Double your power

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.

Use the included FC Connector with the Fluke 789 and get the full benefits of the Fluke Connect® app. Download it now and get started.

Features

Fluke 789 Temperature Kit features:

• Unique new wireless measurement logging capability
• Temperature measurement from -200 °C to 1372 °C using the t3000 FC
• 24 V Loop power supply
• HART mode setting with loop power (adds 250 ohm resistor)
• 100% larger dual display
• 1200 ohm drive capability on mA source
• Enhanced backlight with two brightness settings
• 0% to 100% mA Span Check buttons to toggle between 4 and 20 mA
• Infrared I/O serial port compatible with
• FlukeView® Forms Software Version 2.1
• Externally accessible fuses for easy replacement

These 787 features are also included in the 789:

• DMM designed to meet 1000 volt IEC 1010 CAT III standards
• Precision 1000 V, 440 mA True-RMS digital multimeter
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode test and continuity beeper
• Simultaneous mA and% of scale readout
• 20 mA DC current source/loop calibrator/ simulator
• Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes

Specifications: Fluke 789 FC ProcessMeter™ and Temperature Kit

Fluke 789 ProcessMeter™ with Fluke Connect™

Specifications
Current measurement	Range	0-1 A AC or DC
	Resolution	1 mA
	Accuracy	0.2% + 2 LSD (DC)
	Range	0-30 mA
	Resolution	0.001 mA
	Accuracy	0.05% + 2 lSD
Current sourcing	Range	0-20 mA or 4-20 mA
	Resolution	0.05% of span
	Drive capability	24 V Compliance or 1200 Ω @ 20 mA
Frequency	to 19.999 kHz, 0.005% + 1 LSD
Continuity	Beeps for resistance < 100 Ω
Voltage measurement	Range	0-1000 V AC (true-rms) or DC
	Resolution	0.1 mV to 1.0 V
	Accuracy	0.1% Rdg + 1 LSD (V DC)
Resistance measurement	to 40 MΩ, 0.2% + 1 LSD
Diode test	2.0 V shoes diode voltage drop
Display current and % of span	Yes
Auto Step, Auto Ramp	Yes
Environmental Specifications
Operating temperature	-20°C to 55°C
Storage temperature	-40°C to 60°C
Humidity (without condensation)	95% up to 30°C 75% up to 40°C 45% up to 50°C 35% up to 55°C
Temperature coefficient	0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C)
Safety Specifications
Electrical safety	Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92
Overvoltage category	IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V
Maximum voltage	1000 V RMS
Mechanical and General Specifications
Size (H x W x L)	50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in)
Weight	610 g (1.6 lbs)
Batteries	4 AA alkaline batteries
Warranty	3 years
Battery life	140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock and vibration	Random, 2 g, 5-500 Hz 1 meter drop test

Fluke t3000 FC Wireless K-Type Temperature Module

General Specifications
Range K-Type	-200°C to 1372°C
Resolution	0.1°C
Accuracy	±[0.5% + 0.5°C] counts
Input terminals	K-type mini
LCD w/backlight	3 ½ digits
Log rate/interval	1 sec minimum/adjustable by PC
Battery type	2 AA, NEDA 15 A, IEC LR6
Battery life	400 hours
Memory	Record up to 65,000 readings
RF communications	2.4 GHZ ISM Band
RF communication range	Open air, unobstructed	Up to 20 m
	Obstructed, sheetrock wall	Up to 6.5 m
	Obstructed, concrete wall or steel electrical enclosure	Up to 3.5 m
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +60°C
Temperature coefficient	0.01% of reading +0.03°C per °C
Temperature scale	ITS-90
Operating humidity	90% at 35°C, 75% at 40°C, 45% at 50°C
Altitude	Operating	2,000 m
	Storage	12,000 m
EMC	EN 61326-1:2006
Safety compliance	IEC 61010-1, CAT I, 3rd edition Pollution Degree 2
Certifications	CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating	IP42
Pollution Degree	2
Size (H x W x D)	16.5 x 6.35 x 1.4 cm (6.5 x 2.5 x 1.4 in)
Weight	.22 kg (8 oz)
Not compatible with Fluke CNX test tools

Models: Fluke 789 FC ProcessMeter™ and Temperature Kit

Fluke-789 FC/t3000 Fluke 789 FC ProcessMeter^TMand Temperature Kit Buy now  

Includes:

• Fluke 789 ProcessMeter
• Fluke t3000 FC Wireless K-Type Temperature Module
• Fluke ir3000 FC Connector
• TL71 Premium Test Lead Set
• AC72 Alligator Clips
• Four (4) AA alkaline batteries (installed)
• Users’ manual
• Quick reference guide

Resources: Fluke 789 FC ProcessMeter™ and Temperature Kit

Data Sheets

• 787B and 789 ProcessMeter | Data Sheet
• Fluke Connect™ ir3000 FC Connector | Data sheet

Brochures

• Fluke Connect Country Guide
• See it. Save it. Share it. All the facts, right in the field.

Explore more from our collection.