Description

Fluke i30 AC/DC Current Clamp

(item no. 2584935) 

Product Overview

The Fluke i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Specifications

Electrical specifications
Current range	20 A ac rms or dc
Measuring range	± 30 A
Output sensitivity	100 mV/A
Accuracy (at +25 °C)	± 1 % of reading ± 2 mA
Resolution	± 1 mA
Load impedance	> 100 kΩ
Conductor position sensitivity	± 1 % relative to center reading
Frequency range	DC to 100 kHz (- 0.5 dB)
Phase shift below 1 kHz	< 2 degrees
Temperature coefficient	± 0.01 % of reading/°C
Power supply	9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)	300 V ac rms or dc

General specifications
Maximum conductor size	19 mm diameter
Output connection	Safety BNC connector, supplied with safety 4 mm adapter
Output zero	Manual adjust via thumbwheel
Cable length	2 meters
Operating temperature range	0 °C to +50 °C
Storage temperature range (with battery removed)	-20 °C to +85 °C
Operating humidity	15 % to 85 % (non-condensing)
Weight	250 g
Safety standards	BS EN 61010-1: 2001 BS EN 61010-2-032: 2002 BS EN 61010-031: 2002 300 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.
EMC Standards	EN 61326: 1998 +A1, A2, & A3

Models: Fluke i30 AC/DC Current Clamp

Fluke i30

AC/DC Current Clamp

Resources: Fluke i30 AC/DC Current Clamp

Manuals

• i30s/i30 | Instruction sheet
• i30s/i30 | Instruction sheet supplement

Data Sheets

• I30 Current Probe Data Sheet

Explore more from our collection.