MT350 Loop Impedance and PSC Tester – Electrical Fault Analysis Device

Description

• CAT III 600V and CAT II 1000V
• Custom microprocessor controlled for highest accuracy and reliability
• Loop impedance of 2000Ω range measurement is carried out with low test current (15mA)
• Automatic Lock-Out if Test Resistor Overheats
• Direct readout of Prospective Short Circuit Current and Earth Fault Current
• Measures low loop impedance of 0.01Ω
• 3 LED’s for checking correct wiring status
• Safe voltage measurement function
• Visual indication of reversed phase and neutral at wiring socket
• Double injection rubber housing

The MT350 is a handheld microprocessor controlled Loop Impedance and PSC Tester, which includes 3 loop impedance measuring ranges capable of measurements from any point in the installation for comprehensive testing of distribution systems. The MT350 gives a direct readout of PSC and earth fault current to a maximum of 20kA in 3 measuring ranges. Other features include 3 LED’s for checking the correct wiring status of the circuit under test and the automatic lockout if the resistors overheat. The meter is supplied in double injection rubber housing.

Specifications

Function	Range	Resolution	Accuracy
Loop Range	20,200,2000Ω	0.01Ω	±(2% + 5 Digits)
PSC/PFC	2000A/20KA	0.1A	±(2% of F.S + 5 Digits)
Voltage	50-255V		±(2% of F.S + 5 Digits)
Frequency Response	50Hz
Test Current	25A
Display	LCD
Enclosure	Double injection moulded case
Low battery indication	Yes
Power Source	6 x AA
Weight	700g
Dimensions	200 x 92 x 50mm
Safety Specs	IEC61010-1 CAT III 600V

Safety Ratings

     

Includes

• Carrying Case
• Distribution Board Test Leads
• Magnetic Strip
• Croc Clips
• Plug Cord with IEC Connectors
• 6 x AA Batteries
• Instruction Manual

Downloads

• MT350 Technical Datasheet
• MT350 Instruction Manual

Explore more from our collection.